How-to · 4 min read · Updated October 2026

As an Amazon Associate we earn from qualifying purchases.

Most cost guides put a professional French door install at 2 to 5 hours. One installer’s estimate for an exterior pair runs 5 to 6 hours, and a full day when sidelights or a transom come with it.

So plan on a half day to a full day on site, plus the wait for the doors themselves. That wait is the part people forget.

A special-order door adds several weeks before anyone can start, HomeAdvisor’s French door installation guide points out.

Key facts card showing exterior French door installation takes 2 to 5 hours for a typical pro install, 5 to 6 hours for an exterior pair and a full day with sidelights or transoms
The day on site is short compared with the wait for the order. Sources: Angi, HomeAdvisor, Evergreen Door & Window.

Which number should you plan on?

Angi’s 2026 French door cost guide, HomeAdvisor and Bob Vila’s French door guide all land on 2 to 5 hours for a professional install. Bob Vila stretches that to 2 to 6 hours for exterior doors, because they have to seal tightly.

The installer estimate from Evergreen Door & Window is higher, at 5 to 6 hours for an exterior French door. My read of the gap is scope: a simple pair in a sound frame sits at the low end, and anything that needs work pushes toward the top.

Plan on the longer number and be glad if the crew beats it.

Related Article  Why Choose French Doors

What happens on install day

Crews work in a similar order on most jobs. Any step can run long if the opening turns out worse than it looked.

  1. Protect the floor, then take out the old doors, or the old frame if the new unit needs its own.
  2. Check the opening: the sill, the framing and level. Repairs happen here.
  3. Set the sill pan and flashing, then the new frame, shimmed plumb and square.
  4. Hang the leaves, check the swing and the gap down the middle, and fit the hardware.
  5. Seal and weatherstrip the frame, then test the doors closed, open and locked.

Evergreen puts the prep and the cleanup around the install at 30 to 60 minutes each, so the crew is on site longer than the core job.

A worker installing a door in a bright room with a tall window
The opening decides how the day goes, long before the doors come out of the box. Photo: Ksenia Chernaya on Pexels.

What adds time

Anything that touches the frame, the size or the glass adds hours. Evergreen’s list is the most detailed I found.

Bar chart of what adds time to a French door install: frame repairs one to three hours, custom size one to two hours, sidelights or transoms one to two hours, smart lock 30 to 60 minutes, decorative glass 15 to 30 minutes
Frame repairs add the most. Source: Evergreen Door & Window.

Frame repairs are the big one, since a full frame replacement can turn a half-day job into a full day. Custom sizes, sidelights and transoms each add one to two hours, and cold, wind or rain can slow or delay exterior work.

HomeAdvisor adds that structural changes to the opening can stretch the timeline, and non-standard sizes may need custom framing. Settle the size before the order goes in, as covered in how to size the opening for a pair.

Related Article  What Is the Difference Between French Doors and Double Doors?

What a longer day costs in labor

Angi and HomeAdvisor both give installer rates of $70 to $120 an hour. Multiply that by the hours above and you get the labor range.

Sources: installer rates of $70 to $120 an hour from Angi (2026) and HomeAdvisor (2026). Totals are our arithmetic, and the 8-hour day is our assumption.
Job lengthLabor at $70/hrLabor at $120/hr
2 hours$140$240
5 hours$350$600
6 hours$420$720
8-hour day$560$960

Angi lists $140 to $600 for installer labor on a typical job, which matches the 2-hour and 5-hour rows. A longer day lands above that.

Many quotes are flat prices rather than hourly, so ask which one you are getting and what the crew does if the opening needs repairs.

Before the crew arrives

  • Confirm the doors are in and match the order for size and swing.
  • Clear a path from the driveway to the opening and move furniture back from both sides.
  • Ask whether the crew expects to finish in one day, and what happens if rain or wind stops exterior work.
  • Ask who handles frame repairs and whether they cost extra by the hour or as a flat add-on.
  • Read the warranty for installation requirements.
Related Article  How to Install Dummy Door Knobs on French Doors

That last item matters because some manufacturers require professional installation to keep the warranty valid, as Bob Vila notes.

Can you install them yourself?

No cost guide gives a DIY time, so any number would be a guess. A prehung unit is the easiest route, since the doors arrive hung in their frame and Bob Vila’s guide points to prehung as the quicker way.

I would not touch a new opening in brick, concrete or a bearing wall. Those need a header or lintel sized by a pro, and often a permit.

Block the full day · George Anderson

If it is your first pair, I would set aside a full day and line up a second person. The leaves are heavy with glass in them, and the sill is the step you cannot rush. If the sill or frame turns out rotted, stop there and call a pro.

White French doors opening to a porch with black bistro chairs and potted plants
A finished pair opens the porch to the house. Photo: Ayşegül Aytören on Pexels.

If you are still deciding between swing doors and sliders, see how French doors compare with sliding patio doors. For wide openings, typical maximum exterior French door widths covers how far a pair can stretch.