A reindeer wreath is a craft the whole family can finish in one afternoon, and most of the steps suit small hands. These 10 picks cover the base, the antlers, the face and the glue, so children can help after school without a trip to the craft store. For more ideas across the whole entry, see our Christmas door ideas.
Some product links below are Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases.
Choose the base first
Every other pick has to fit the base, so decide on vine or foam before you buy anything else. The checker near the end tells you how many packs a group of children will need.

The picks below run from the base to the face, then the bow, the berries and the glue. Each one has a short job that a child can take on.
1. A Grapevine Base That Holds Everything

The easiest base for a reindeer wreath is a grapevine ring. The gaps in the vines hold sticks, wire and ribbon, so children can poke the pieces in without much glue.
The listing below is a 14 inch wreath sold in a bulk pack of 12, which suits a class or a group of neighbors better than one family. Share the extras with friends.
Shop this pick
A natural base for the face
- GRAPEVINE WREATHNatural grapevine wreath, 14 inch, bulk 12 packShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Hang the finished wreath on a hook with a good weight rating, since the face adds weight.
2. A Foam Wreath Form for Younger Children
Soft foam is easy to work, so sticks and pom-poms press in, and the flat surface takes glue well. The drawing shows where each pick goes on the wreath.
Wrap the foam in ribbon or paper first, because bare white foam shows through any gap. An adult should handle pins, and children can press on the pieces.
Shop this pick
A foam ring in a 12 inch size
- FOAM WREATH FORMCraft foam wreath form, 12 inch, 3 packShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
The pack of three lets each child cover a ring of their own.
3. Craft Stick Antlers

Brown craft sticks make quick antlers. Glue two sticks into a V, add a short branch on each side, and let the glue set before you press the antlers onto the wreath.
The sticks in the listing are 6 inches long, so each antler is easy to handle. Make them on a flat tray so wet glue never touches the table.
Shop this pick
Sticks for the antlers
- CRAFT STICKSBrown craft sticks, 6 inch by 3/4 inch, 100 packShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Glue the antlers on the back of the wreath so the front stays clean.
4. A Red Pom-Pom Nose
Every reindeer needs a red nose, and a big pom-pom is the best job on the whole wreath. Press it into glue at the bottom of the face, or tie it on with a piece of ribbon.
A one inch pom-pom looks small on a large wreath, so glue three together for a bigger nose. The bag has 150, which leaves plenty for spare noses.
Shop this pick
Red pom-poms for the nose
- POM POMSRed pom poms, 1 inch, 150 piecesShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Pom-poms are small parts, so keep them away from children under 3.
5. Googly Eyes That Look Back

Googly eyes give the wreath a face in seconds. Peel and stick the self-adhesive ones in pairs, one on each side of the nose.
The set has 8 eyes in 2, 3 and 4 inch sizes, so mix them for a sleepy or a surprised look. Let each child choose the size of their reindeer’s eyes.
Shop this pick
Big eyes for the face
- GOOGLY EYESGiant self-adhesive googly eyes, 2, 3 and 4 inch, set of 8Shop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Press each eye flat for a few seconds so it grips.
6. Jingle Bells on a Ribbon Collar
Small bells tied on a ribbon give the reindeer a collar and a soft sound each time the door moves. Knot the ribbon twice so no bell can slide off.
Bells are small parts. The U.S. Consumer Product Safety Commission says a small part is any object that fits entirely into a cylinder that approximates the throat of a child under 3, so keep bells away from toddlers.
Shop this pick
Red bells for the collar
- JINGLE BELLSRed jingle bells, 1 inch, 50 piecesShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
An adult should tie the bells on, and children can choose the order.
Run through this list before the children start.
- Keep bells, eyes and pom-poms away from children under 3
- Let the glue dry before hanging
- Test any adhesive on a small spot first
- Check the weight of the wreath against the hook
Each check takes a minute and keeps the afternoon calm.
Our take · George Anderson
For most families I would start with a grapevine base, craft stick antlers, googly eyes and a red pom-pom nose. Those four need little glue, give the face at once and suit many ages. Add the ribbon and the bells last, with an adult doing the tying.
The last four picks add color and help the pieces hold.
7. A Plaid Bow at the Top

Plaid ribbon adds the traditional Christmas color. Wired ribbon keeps its shape, so children can fluff the loops while an adult ties the knot.
Wire the bow to the base instead of gluing it, so it comes off cleanly in January. The roll is 12 yards long, which makes several bows.
Shop this pick
Wired plaid ribbon for the bow
- PLAID RIBBONRed plaid wired ribbon, 2-1/2 inch by 12 yardsShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Trim the tails to a matching length with adult scissors.
8. A Paper Plate Reindeer for the Youngest

Paper plates make a wreath with only scissors and glue. Cut out the middle to leave a ring, then let children paint it or glue paper onto it.
It is also the cheapest pick, so a tear is no loss. Uncoated plates take paint and glue better than shiny ones.
Shop this pick
Plain plates for a paper wreath
- PAPER PLATESUncoated white paper plates, 9 inch, 200 countShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Cut the ring first and let the children add the face.
9. Berry Picks for a Splash of Color

Red berries and small pine sprigs add color around the face. Tuck the stems into the vines or the foam, and trim them with scissors that an adult holds.
The set in the listing is artificial, so there is nothing to wilt before the day. Keep berry stems away from toddlers, as with the bells.
Shop this pick
Berry stems for color
- BERRY PICKSArtificial pine branches with red berries, 70 piecesShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Spread the berries evenly so the wreath looks full from the street.
10. Washable Glue for Small Hands

Washable school glue suits children best. It spreads with a finger or a brush, and it cleans off hands and tables with water.
It sets slowly, so use it for paper and pom-poms and use wire for the heavy parts. Hold ribbon in place with a clothespin while the glue dries.
Shop this pick
Washable glue for paper and pom-poms
- SCHOOL GLUEElmer’s washable school glue, 4 ozShop on Amazon
As an Amazon Associate we earn from qualifying purchases.
Let the wreath dry flat overnight before you hang it.
Here is the order of work once you have chosen.
- Pick the base and lay out the pieces
- Make the antlers on a tray and let the glue set
- Press on the eyes and the nose
- Tie on the bow and the bells with an adult
- Hang the wreath on a hook
Work on a table that you can wipe clean, and keep the small parts in a bowl.
Packs differ in size, so check the count on each listing before you buy. Enter your own numbers below.
Use the pack size printed on the listing. The default numbers are drawn out below.
Quick Answers on Reindeer Wreaths
Which parts of a reindeer wreath can young children do?
Pressing on eyes and pom-poms, spreading glue and choosing where the pieces go. An adult should handle scissors, wire and anything small for children under 3.
How do I hang a reindeer wreath?
Use an over-the-door hook or an adhesive hook rated for the weight. Weigh the finished wreath on a scale, and check that the door still closes.












