Door Hardware · Product Review

A whole-house matte black changeover takes thirty hinges, not six — and this TDCHinges 30-pack is built for that job, with one difference from most bulk packs: every hinge ships with its screws, 180 of them, including longer screws for tired holes.

The spec is the residential standard template — 3.5 inch iron hinges, 5/8 inch radius corners, matte black — on a plain bearing the listing sells as its “no squeak” design. The pack holds a 4.8 out of 5 average across 440 Amazon ratings. Related reading: Black Door Hinges 4 Inch Review.

Disclosure

As an Amazon Associate we earn from qualifying purchases.

The short answer

Buy this TDCHinges 30-pack for a whole-house matte black swap: ten doors’ worth of standard hinges with all 180 screws included and a 4.8 out of 5 rating across 440 reviews. If ratings depth matters most to you, the same brand’s longer-running 30-pack below has ten times the reviews.

What you’re getting

Thirty 3.5 × 3.5 inch iron hinges with rounded 5/8 inch radius corners and a six-hole pattern — the mortise fit of most modern pre-hung interior doors. Per the brand’s listing, the hinges run on a plain bearing, open to 270 degrees, and carry a removable riveted pin for door removal.

Related Article  Adjusting Self Closing Hinges

The screw kit deserves its own sentence: 180 screws are included, and the brand includes extra-long screws alongside the standard ones — the detail that saves a job when an old screw hole has worn and a standard screw just spins.

Specs

BrandTDCHinges
Size3.5 in. × 3.5 in.
CornerRounded, 5/8 in. radius
MaterialIron
FinishMatte black
Holes6 per hinge
Pack size30 hinges, 180 screws included
UseInterior residential doors

The good and the not-so-good

  • Ten doors in one box — the full changeover in a single order.
  • 180 screws included, with extra-long screws for worn holes.
  • A 4.8 out of 5 average — the strongest rating among the bulk matte black packs.
  • Removable riveted pin, so doors come off their hinges the easy way.
  • One production run keeps the matte black consistent across the house.

Worth knowing before you buy

  • 440 ratings is a thinner base than the brand’s older 30-pack listing (4,447) — see below.
  • Iron construction: the finish is the protection, so these are interior hinges.

Who they’re for — and who should skip them

Renovators and landlords standardising a whole house on matte black, and anyone whose doors carry the standard 3.5 inch, 5/8 radius hinge. Thirty hinges cover ten doors at three per door.

Skip the 30-pack for a one- or two-door job — smaller packs exist for that. And check your corner radius before ordering: 5/8 radius is the common modern standard, but 1/4 radius and square-corner doors need different hinges.

Related Article  Are Door Hinge Pins Standard

Fitting them

  1. Work one door at a time, and one hinge at a time — the door stays hung and aligned throughout.
  2. Seat the new leaf in the existing mortise and drive the standard screws.
  3. Where a hole has worn and a screw spins, use one of the included extra-long screws to bite fresh timber.
  4. Work top to bottom down each door, then move to the next.

Worth comparing

TDCHinges flat 30-pack — the track-record version

The same brand’s longer-running matte black 30-pack: same size and corner, rated 4.8 out of 5 across 4,447 ratings. If proof-by-volume is your deciding factor, this is the pack — read our TDCHinges 30-pack review.

We earn a commission if you make a purchase, at no additional cost to you.
11/02/2026 04:41 pm GMT

The other 30-pack — a second bulk option

Another renovation-sized matte black 30-pack in the same standard spec, also rated 4.8 out of 5, covered in our 30-pack review. Bulk matte black is a buyer’s market; compare the live prices on the day.

Questions people ask

How many doors does a 30-pack cover?

Ten doors at the standard three hinges per door.

Are screws included?

Yes — 180 screws, including extra-long screws for worn holes, per the brand’s listing.

Will they fit my doors?

If your current hinges are 3.5 inch with 5/8 inch radius corners — the common modern standard — yes. Compare one hinge before ordering.

What does ‘no squeak’ mean here?

It is the brand’s name for the plain-bearing design of this listing. Plain bearings are the standard quiet-running hinge type at this level.

The bottom line

A bulk pack lives or dies on the boring details, and this one gets them right: standard fit, every screw in the box — including the long ones that rescue worn holes — and a 4.8 rating. For a whole-house swap, it earns its place on the shortlist.