The Design House 181420 is the value-pack version of the brand’s standard interior hinge: ten 3.5 inch satin nickel hinges — three doors’ worth plus a spare — from one of the names you find in actual hardware stores.
The spec sheet (Home Depot lists this model, and Design House’s own sheet agrees) is the full standard template: steel butt hinges, 3.5 × 3.5 inches, 5/8 inch radius corners, a 6-hole half-moon pattern, removable pins, and mounting screws included. Design House adds that the hinges are water-resistant and pre-lubricated, fit left or right-handed doors, and carry a 1-year limited warranty. The Amazon listing carries a 4.6 out of 5 average across 5,265 ratings. For the product-level detail, see Design House 181479 Door Hinge Review.
Disclosure
As an Amazon Associate we earn from qualifying purchases.
The short answer
Buy the 181420 10-pack for a multi-door satin nickel changeover: name-brand steel hinges with screws included, removable pins, and a manufacturer warranty behind them, rated 4.6 out of 5 across 5,265 ratings on the listing. Brass scheme or a single door instead? Both cases are covered below.
What you’re getting
Ten hinges cover three doors at three per door, with one spare for the door you inevitably add to the job. Satin nickel is the default modern hardware finish — the one that matches the lever and knob sets most homes already run — and a single value pack keeps the tone identical across every door.
The working details matter more than the finish: the pins are removable, so doors lift off for painting; the pins arrive pre-lubricated, which is Design House’s answer to the new-hinge squeak; and the water-resistant construction suits bathroom and laundry doors, per the manufacturer.
Specs
| Model | Design House 181420 |
| Size | 3.5 in. × 3.5 in. |
| Corner | 5/8 in. radius |
| Material | Steel |
| Finish | Satin nickel |
| Holes | 6, half-moon pattern |
| Pin | Removable |
| Handing | Left or right-handed doors |
| Pack size | 10 hinges, mounting screws included |
| Warranty | 1-year limited (manufacturer) |
The good and the not-so-good
- A hardware-store brand with a published spec sheet and a warranty.
- Screws included, pins removable and pre-lubricated.
- Water-resistant construction for bathroom and laundry doors, per the manufacturer.
- Ten hinges: three doors plus the spare every project ends up needing.
- Reversible handing — nothing to get wrong at ordering.
Worth knowing before you buy
- Check your corner radius: this is the 5/8 radius version; 1/4 radius doors need the sibling model.
- Three doors per pack — whole-house jobs need several packs, where bulk generics get cheaper per hinge.
Who they’re for — and who should skip them
Anyone standardising several interior doors on satin nickel who wants a branded hinge with the screws and warranty sorted.
Skip them if your scheme is brass — the same family’s satin brass 12-pack is the colour-matched route. And for one door only, the 181412 3-pack below is the same brand in repair quantity.
Fitting them
- Work one hinge at a time with the door hanging; seat the new leaf in the existing mortise.
- Drive the included screws, top to bottom, checking the swing as you go.
- Compare one old hinge’s corner radius before starting — 5/8 inch radius must match the mortise.
- For painting, tap the pin up and lift the door off; the removable pin is there for exactly that.
Worth comparing
Design House 181412 — the 3-pack version
The brand’s single-door satin nickel pack: water-resistant, pre-lubricated, reversible, rated 4.7 out of 5 across 2,760 ratings. Full detail in our 181412 review.
Design House 181594 — the 4 inch sibling
Same brand and finish, one size up for heavier doors: a 4 inch 3-pack rated 4.6 out of 5 across 3,576 ratings. See our 181594 review.
Questions people ask
How many doors does a 10-pack cover?
Three doors at three hinges per door, with one hinge spare.
Are screws included?
Yes — mounting screws are included, per the model’s retail specification.
Do they fit left and right-handed doors?
Yes, the 181420 is reversible for either handing.
Is there a warranty?
Design House lists a 1-year limited warranty for this model.
The bottom line
The branded value pack done right: full standard spec, screws and quiet pins in the box, a warranty behind it, and enough hinges for three doors. Satin nickel’s default hinge, in the quantity projects actually need.
Related posts
Design House 181412 Door Hinge Review
Design House 181479 Door Hinge Review
Design House 181370 Hinge Review
Design House 181594 Door Hinges Review
Design House 188938 Door Hinges Review
How to Make Every Door in Your House Feel Like One Design
Milescraft 1229 HingeJigPLUS Door Hinge Jig Review
6-Pack Door Hinge Review
