This Goldenwarm 3-pack solves a problem most hinge packs ignore: houses where the mortises don’t all match. Each 4 × 4 inch hinge is built with two corner styles — one leaf with a 5/8 inch radius corner, the other square — so the same hinge seats into radiused door mortises and square frame mortises without a chisel.
The rest of the pack is equally practical: satin nickel iron hinges, one door’s worth at three hinges, with 24 matching screws included per the manufacturer’s own store. Goldenwarm recommends three hinges per door for interior and exterior doors alike. The set holds a 4.6 out of 5 average across 851 Amazon ratings. For the product-level detail, see Goldenwarm 3 Pack Door Hinges.
Disclosure
As an Amazon Associate we earn from qualifying purchases.
The short answer
Buy this 3-pack for one 4 inch-hinged door — above all when your door and frame mortises have different corner styles: the dual-corner leaves seat into both, matching screws are included, rated 4.6 out of 5 across 851 ratings. Standard 3.5 inch doors? Measure first — 4 inch hinges need 4 inch mortises. For the product-level detail, see AmzGod Door Hinges Brushed Nickel – 42 Pack Review.
What you’re getting
Three 4 × 4 inch hinges in a brushed satin nickel finish. The 4 inch size is the heavier-door standard — entry doors and solid-core doors commonly hang on 4 inch hinges where interior doors use 3.5 — and one pack is exactly one door’s worth.
The dual-corner design is the headline. Plenty of doors were mortised with a radius on one side and a square corner on the other, and a uniform-corner hinge then sits badly in one of the two. This hinge’s mixed leaves match that reality. The 24 included screws are colour-matched to the finish, per the manufacturer.
Specs
| Size | 4 in. × 4 in. |
| Corners | One leaf 5/8 in. radius, other leaf square |
| Finish | Satin nickel (brushed) |
| Material | Iron (per listing) |
| Pack size | 3 hinges, 24 matching screws included |
| Use | Interior and exterior doors — 3 per door (manufacturer) |
The good and the not-so-good
- Dual-corner leaves fit mixed mortises that defeat standard hinges.
- The 4 inch size heavier and solid-core doors actually hang on.
- 24 colour-matched screws included — one pack, one door, nothing missing.
- 851 ratings at 4.6: a solid record for a specialist pack.
Worth knowing before you buy
- 4 inch hinges will not drop into 3.5 inch mortises — measure before ordering.
- Iron construction rather than stainless: best kept to interior or sheltered doors.
- One door per pack; multi-door jobs multiply quickly.
Who they’re for — and who should skip them
Owners of a heavier door on 4 inch hinges — especially anyone who has discovered their door and frame mortises don’t share a corner style.
Skip them for standard interior doors on 3.5 inch hinges; the nickel options below are your size. And for a fully exterior, weather-exposed door, a stainless hinge is the longer-lived material choice.
Fitting them
- Measure the existing hinges first — confirm 4 inches, and check which mortise is radiused and which is square.
- Swap one hinge at a time with the door hanging, orienting each new hinge so the radius leaf meets the radiused mortise.
- Drive the included matching screws, working top to bottom.
- Check the swing and the latch line before fitting the next hinge.
Worth comparing
Brushed nickel 18-pack — square corners, bulk quantity
Eighteen 3.5 inch square-corner nickel hinges with removable pins, rated 4.7 out of 5 — the whole-house route for standard doors. See our nickel 18-pack review.
Design House 181412 — the branded 3-pack
A hardware-store name’s satin nickel 3-pack at the standard 3.5 inch size, water-resistant and pre-lubricated, rated 4.7 out of 5 across 2,760 ratings. Full detail in our 181412 review.
Questions people ask
Why do the hinges have two different corners?
One leaf is radiused (5/8 inch) and the other square, so the hinge fits doors and frames whose mortises were cut with different corner styles — a common mismatch in real houses.
How many screws come with the pack?
24 matching screws, per the manufacturer — eight per hinge, colour-matched to the finish.
Will they fit my 3.5 inch hinge mortises?
No — these are 4 inch hinges. Measure your existing hinges first.
How many hinges does a door need?
Three per door is the manufacturer’s recommendation and the standard for full-size doors.
The bottom line
A one-door pack built around a real-world annoyance: mismatched mortise corners. If your 4 inch door’s hinges never sat quite right, this is probably the shape that fixes it.
Related posts
AmzGod Door Hinges Brushed Nickel – 42 Pack Review
Goldenwarm 3 Pack Door Hinges
18 Pack Nickel Door Hinges Review
SORGMACH Door Hinges Satin Nickel 3.5 Inch Interior Hinges Review
30 Pack Rounded Matte Black Door Hinges 3.5 Inch Review
Amazon Basics Rounded 5/8 Radius interior, 3.5″ x 3.5″ Door Hinges, 18 Pack, Matte Black review
6 Pack Non-Mortise Door Hinges Review
Satin Brass Door Hinges 12 Pack Review
